Of Interest archive

The European Domestic Agency Fusion for Energy (F4E) is calling for fusion technology transfer demonstrator proposals before 30 July 2024. 

Open to European companies and organizations, the call aims to support projects that propose to take fusion breakthroughs into new markets. Proposals will be evaluated on the feasibility of the demonstrator project, its innovation potential, and socio-economic impact.

Proposals should describe the further use or adaptation of a technology or skill developed under F4E activities into a new product or service in non-fusion applications. The Call invites entities from the fusion sector (F4E's Industrial Partners) and the non-fusion sector to submit proposals.

The selected project will be funded with EUR 50,000. See this webpage for a description of the Call and this website to apply.

The 13th ITER International School will be held from 9 to 13 December 2024 in Nagoya hosted by National Institute for Fusion Science (NIFS), Japan. The theme this year is "Magnetic Fusion Diagnostics and Data Science."

Diagnostics are key to the achievement of ITER fusion power demonstration goals and they require the application of a wide range of techniques. But diagnostics are not enough to ensure ITER's success; only through advanced analysis of the data they provide will it be possible to guide the experiments towards their fusion power goals. It is timely to address these multidisciplinary areas in the ITER school.

Pre-registration will open in early May. See all information here. To advertise the School in your institute, download a poster _Do_ITER_internationalSchool_2024_fa-compressed.pdf_DoX_here_Dx_.

The annual PhD Event organized by the European Fusion Education Network, FuseNet, will take place this year at the University of Stuttgart, Germany, from 3 to 5 September.

Meet and greet fellow fusion researchers from Europe and expand your network. The event will feature high-profile keynote speakers, a top-notch scientific program and the much anticipate PechaKucha contest, where students present their research in 20 slides, 20 seconds per slide.

Registration is open through 15 June 2024. See more information at this address.

In the sixth installment of ITER Japan's manga series on the project, our hero Taiyô Tenno joins veteran staff member Mirai Mitsuhashi on a visit to the QST* R&D facility for the ITER divertor. Researchers there have developed a full-scale prototype for the outer vertical target, one of components of the divertor that will have to withstand the most intense heat load.

By going back in time, Mirai reviews the incredible challenge that was posed to industry and the years of development  that culminated in the successful high heat flux testing of the full-scale prototype. 

Travel along with Mirai and Taiyô by downloading Volume 6 of "ITER: A Small Sun on Earth" (divertor) from the ITER Japan website or directly from the ITER Publications gallery (comics).

*QST = Japan's National Institutes for Quantum Science and Technology 

Applications are open for the EUROfusion Bernard Bigot Researcher Grants that fund individual postdoctoral research projects for two years starting in 2025.

Researchers and engineers of all nationalities in possession of a doctoral degree (PhD) who have completed the PhD and defended their thesis in the two years preceding the application deadline are eligible. Candidates must be employed by a EUROfusion Consortium member or one of their Affiliated Entities during the grant period. Interested candidates should jointly prepare their application with an institute(s) affiliated with EUROfusion, who submits the application and offers to employ the candidate for the proposed duration of the project.

The grant will contribute to the salaries and research and training activities of up to 10 outstanding early career researchers. The application deadline is 6 May 2024. For details, or to join the information session planned on 11 April 2024 at 14:00 CET, see the EUROfusion website.

In just the past few weeks, these in-depth studies and reports have been published on fusion energy and fusion energy acceleration. 

Analysis on a strategic public-private partnership approach to foster innovation in fusion energy is a report commissioned by the European Union that provides analysis and recommendations for the European Commission on the establishment of a public-private partnership approach to support industrial innovation in fusion. The 128-page report can be downloaded at this address.

As part of its Technical Documents series (TECDOCs), the International Atomic Energy Agency has just published Considerations of Technology Readiness Levels for Fusion Technology Components (IAEA-TECDOC-2047, 91 pages) and Plasma Physics and Technology Aspects of the Deuterium—Tritium Fuel Cycle for Fusion Energy (IAEA-TECDOC-2049, 73 pages). Both reports can be downloaded or ordered in print form from this webpage. 

-- Photo of KSTAR (© KFE)

The ITER Organization has opened its 2024 internship program with the publication of 60 offers on the ITER website. These opportunities are geared toward undergraduate and postgraduate students, with a broad array of topics across scientific, technical and support departments. Applicants must hold a passport from one of the countries participating in the ITER Project (the People's Republic of China, the European Union, India, Japan, the Republic of Korea, the Russian Federation and the USA).

See this page to apply. The deadline for students to submit their application is 17 March 2024. Please note that additional internship opportunities will be launched in May 2024.

2024 IEEE Fusion Technology Awards will be presented during the 31th Symposium on Fusion Engineering (SOFE 2025, Boston) to individuals who have distinguished themselves through innovation in any fusion approach that has shown significant promise or progress in the design of reactors or in the understanding of fusion plasmas. The awards each consist of a USD 3,000 cash prize, a plaque, and an invited talk at SOFE 2025.

The nomination package—consisting of a letter describing the technical contributions on which the nomination is recommended and a current resume of the candidate—should be sent before 11 March to the Fusion Technology Committee Awards Chair, Dr. Carl Pawley (drcpawley@ieee.org). Other supporting endorsements are encouraged. Equal consideration will be given to innovation in all fusion approaches and outstanding leadership in the fusion community.

For more detailed information on eligibility, basis for judging, the nomination process or a list of past award recipients, please visit the IEEE-NPSS website and go to the "Fusion Technology Awards" section.

--The IEEE Nuclear Plasma Science Society (NPSS) Fusion Technology Standing Committee

There was a time in fusion history when one single man could be credited with inspiring the best part of a machine's design. French physicist Paul-Henri Rebut was this kind of a man. In the early 1970s, a little more than a decade after entering fusion research at France's Atomic Energy Commission (CEA), he was instrumental in building TFR, for Tokamak de Fontenay-aux-Roses, a Paris suburb where CEA was then located. For his colleagues, however, TFR meant Tokamak Façon Rebut, which can be understood as "Tokamak à la Rebut"...

Operational in 1973, TFR was an ambitious and powerful machine that played a key role in exploring the physics and establishing the technology that made possible the construction of the "giants of the 1970s,"—the European JET, the American TFTR, the Japanese JT-60 and the Soviet T-15.

The experience accumulated at TFR led to the first international cooperation in constructing a fusion machine, the European JET whose design, quite naturally, was entrusted to Rebut and his team. Last week, as the fusion community celebrated JET's accomplishments at the Culham Campus (UK), the 89-year-old physicist, introduced as "the inventor and designer" of the iconic machine, was greeted by a standing ovation. It is under Rebut's stewardship that JET produced the first-ever deuterium-tritium plasmas, a campaign that culminated in a historical 16 MW of peak fusion power. Rebut later piloted the ITER design activities (1992-1994), and well into the 2000s he was a familiar figure at ITER Headquarters providing advice and suggestions to optimize the ITER design.

Photo: The JET project team in 1977: Paul-Henri Rebut (centre) and colleagues Alan Gibson (UK), Giulio Celentano (Italy), Ettore Salpietro (Italy), John Last (UK), Barry Green (Australia), Peter Noll (Germany), Jean-Pierre Poffé (Belgium), Ingevar Selin (Sweden), and Dieter Eckhart (Germany). © EFDA

Read the full article on Rebut's standing ovation during JET's celebration day here.

The ITER Organization has opened its 2024 internship program with the publication of 60 offers on the ITER website. These opportunities are geared toward undergraduate and postgraduate students, with a broad array of topics across scientific, technical and support departments. Applicants must hold a passport from one of the countries participating in the ITER Project (the People's Republic of China, the European Union, India, Japan, the Republic of Korea, the Russian Federation and the USA).

See this page to apply. The deadline for students to submit their application is 17 March 2024. Please note that additional internship opportunities will be launched in May 2024.

The third edition of the Tritium School will take place in Marseille, France, from 18 to 22 March 2024. Organized by the TITANS Project, which strives to improve tritium management and knowledge to meet the growing demand for nuclear energy, it is organized around four days of invited lectures and contributed talks, and a fifth day comprising a visit to the ITER site.

The young generation of researchers working in fusion and fission research and development is encouraged to participate.

Topics for discussion will include tritium management, inventory and control; waste; radiotoxicity/ecotoxicity; epidemiology of tritium; and tritium dosimetry.

For all information, and to register, see this webpage. The School will be conducted in English.

If your PhD was awarded after 1 January 2021—or you are about to obtain one—you are eligible to apply for a Monaco-ITER Postdoctoral Fellowship.

The Fellowship Program is recruiting now for two-year terms beginning autumn 2024.

Since 2008, 39 young scientists and engineers have been able to participate directly in ITER, working on cutting-edge issues in science and technology with some of the leading scientists and engineers in each domain. The principal aim of the Research Fellowships, which are funded by the Principality of Monaco, is the development of research excellence in fusion science and technology within the framework of ITER.

The deadline for application is coming up (29 February 2024). See all information here.

The Fusion Industry School is a two-week interactive program of lectures from world-leading experts in fusion, aimed at providing an overview of the current progress and challenges to industry professionals. The school consists of lectures, networking sessions, panel discussions and Q&As as well as visits to the UKAEA national fusion facilities. 

The Fusion Centre for Doctoral Training (CDT) and the UK Atomic Energy Authority (UKAEA) have worked with the fusion community to prepare a program created to meet the needs of the emerging fusion industry and associated supply chain companies and organizations.

The first week (17-20 June 2024) takes place in York (UK) and focuses on the underpinning fusion science and technology. The second week (30 September to 3 October 2024) in Oxfordshire (UK) builds on the first week, with more of an emphasis on engineering applications. The program is optimized for delegates attending both weeks, but there is still benefit to only attending one. No prior knowledge of fusion science and technology is necessary.

Visit the program website for all information and testimonials from previous delegates: Fusion Industry School 2024

Fusion Power Associates is calling out for nominations for two awards:

* The 2024 Leadership and Distinguished Career Awards (nominations are sought by 1 June). No supporting material is required for these nominations, although supporting statements are appreciated.

* The 2024 Excellence in Fusion Engineering Awards (Nominations are sought by 15 June). The purpose is to recognize individuals in the early part of their careers (maximum age 42) with both technical accomplishment and demonstrated leadership qualities. Nominating material should include the candidate's bio and letters of recommendation, including at least one letter from outside the nominee's home institution. 

Nominations and nominating material should preferably be sent electronically but may also be faxed to 1-301-975-9869 or mailed to Fusion Power Associates, 2 Professional Drive, Suite 249, Gaithersburg, MD 20879, USA.

The purpose, criteria and list of previous recipients for all awards are posted at http://fusionpower.org and click on Awards. For questions contact: fusionpwrassoc@aol.com

The European Domestic Agency, Fusion for Energy, has announced that the first of five vacuum vessel sectors under its responsibility has passed leak testing.

The tests, which assess leak tightness using nitrogen and helium, are the first in a line of factory acceptance tests that must be completed successfully before the component can ship.

See the full report on the Fusion for Energy website.

--View of the Europe's vacuum vessel sector 5, Westinghouse/Mangiarotti, Italy ©F4E

The IEEE Nuclear Plasma Science Society (NPSS) Fusion Technology Standing Committee is pleased to announce that during the 31th Symposium on Fusion Engineering (SOFE 2025) in Boston, the 2024 Fusion Technology Awards will be presented to individuals who have distinguished themselves through innovation in any fusion approach that has shown significant promise or progress in the design of reactors or in the understanding of fusion plasmas. The awards each consist of a USD 3,000 cash prize, a plaque, and an invited talk at SOFE 2025.

The nomination package—consisting of a letter describing the technical contributions on which the nomination is recommended and a current resume of the candidate—should be sent to the Fusion Technology Committee Awards Chair, Dr. Carl Pawley (drcpawley@ieee.org). Other supporting endorsements are encouraged. Equal consideration will be given to innovation in all fusion approaches and outstanding leadership in the fusion community.

For more detailed information on eligibility, basis for judging, the nomination process or a list of past award recipients, please visit the IEEE-NPSS website and go to the "Fusion Technology Awards" section.

The nomination deadline for the 2024 Fusion Technology Awards is 11 March 2024.

Senior Project Manager Laure Navarro (ITER/MOMENTUM) will be speaking in March at the Construction Technology Summit in Austin, Texas, on the topic of "How digital technology is helping to build the ITER fusion reactor."

The conference is planned for Tuesday 19 March at 15h10 CST (in-person only).

See all information on this webpage.

In December 2021 the JET tokamak broke the world record for fusion power. Pulse #99971 achieved total fusion energy of 59 MJ—more than doubling JET's 1997 record.

STARMAKERS: The Energy Of Tomorrow tells the story of this achievement. It takes the viewer behind the scenes of the landmark European fusion experiment to show how scientists and engineers overcame incredible obstacles to move the world one step closer to a future of clean, safe, cheap and unlimited energy.

The documentary is available on Prime Video to rent or buy. Depending on your region, try this link or this link.

The European Master of Science in Nuclear Fusion and Engineering Physics (FUSION-EP) is a two-year Erasmus Mundus Joint Master Degree (EMJMD) funded by the European Union. Focusing on the physics and technology of nuclear fusion as an energy source, it offers research-oriented education in engineering physics, offered by a consortium of eight European universities in Belgium, Czech Republic, France, Germany and Spain.

The curriculum is organized in two periods of increasing specialization, each in two different countries, along two distinct tracks: Fusion Sciences and Fusion Technology.

Students from all countries can apply. The selection procedure does not make any distinction between EU students and students coming from outside the EU. Scholarships are available to top-ranked students that cover the participation fee and offer a monthly allowance for the two years.

The campaign for the program beginning autumn 2024 is underway now. Apply before 15 February 2024 on the FUSION EP website.

The 15th ITER Neutronics Meeting and Fusion Neutronics Workshop 2024 will be held at ITER Headquarters from 8 to 10 April 2024.

The workshop will provide the opportunity for the fusion neutronics community to discuss recent advancements, issues and successes in the field.

Considering work underway in startups on alternative fusion concepts, progress on other technologies such as inertial fusion, and recent advancements (codes, shielding materials, etc.), the workshop seeks to broaden participation beyond ITER/DEMO scope. We encourage young researchers and fusion start-ups to participate in this event and present their work.

Planned topics include:

• Neutronics related to ITER
• Nuclear-radiation-related safety issues (safety margins/uncertainties, code qualification)
• Computational tools and nuclear data relevant for nuclear fusion (transport codes, activation codes, CAD/MCNP converting tools ...)
• Dose reduction methods and optimization, ALARA
• Shielding materials
• Material damage, nuclear heating, radioactive waste production and management 
• Accelerator-driven neutron sources for fusion applications
• Activated corrosion products
• Nuclear licensing for fusion reactors 
• Neutronics beyond ITER (DEMO, fusion power plants, alternate fusion schemes)

This meeting will be held primarily in-person but a few online presentations/participations are also possible. Subject to conditions, this workshop also includes ITER construction site visit.

See important dates and registration information on this page.