Auxiliary buildings
Support for the machine
17 Dec 2018
A tokamak would be a lifeless machine if it was not supported by a significant industrial infrastructure. On the ITER platform close to 40 buildings host the equipment and systems that make burning plasma experiments possible.
One of the newest structures on site has gone up in the heat rejection zone on the north side of the platform. The European Domestic Agency is building the infrastructure, the Indian Domestic Agency is procuring the equipment, and the ITER Organization is overseeing installation works.
A tokamak needs to be fed electrical power in both AC and DC form; it requires powerful heating systems to bring the plasma to the required temperature; the machine's superconducting magnet system demands a constant circulation of cooling fluids; the heat generated on the plasma-facing components must be evacuated by a large water cooling system, complete with kilometres of piping, basins and cooling towers.
See the gallery below to see some of the under-sung areas of the ITER worksite that host critical plant systems.
Ready to serve the installation in 2019
Installation works in the Site Services Building have been completed on time, despite a complicated context of limited space, numerous interfaces and coordination. Eight 25-tonne chillers are installed at right (plus their soft starters in yellow).
Les travaux d'excavation des fondations du Bâtiment d'assemblage sont moins spectaculaires que ceux de la fosse d'isolation sismique du tokamak... on ne déplacera que 10 000 mètres cubes de terre et de roche.
Avant la tenue de la onzième réunion du Conseil ITER, conseil d'administration d'ITER Organization, la salle du Conseil est l'objet de toutes les attentions.
Supporting structures
If ITER were an industrial fusion plant, a significant part of the heat generated by the burning plasmas would be used to produce pressurized steam and (by way of turbines and generators) electricity. Only residual heat would need to be dissipated. In ITER, a high-performance heat rejection system has been designed and is under construction. Supporting structures are going up now for the cooling tower cells.
One structure, 10 cells
Each of the 20-metre-tall cooling tower cells will be filled with hundreds of layers of corrugated plastic fill and equipped with a large fan that pulls air upward. As water falls through the fill, some of it evaporates due to the strong uptake of air, removing heat.The dark-grey support structure for the cooling tower cells is made of pultruded fibre-reinforced polymer beams.
Transformer row
Equipment arriving from China and Korea is installed in the bays outside of the Magnet Power Conversion buildings. Two 150-metre buildings will act as the AC/DC adapter that converts current coming out of the electrical distribution network into the DC current required by the magnets.