Industrial milestone
Japan completes the first D-shaped coil of the ITER Tokamak
3 Feb 2020
-
ITER Japan
In a ceremony on 30 January, a major industrial achievement was celebrated in Japan—the completion of the first 360-tonne D-shaped toroidal field coil for the ITER Tokamak. This first-of-a-kind magnet will leave the port of Kobe in early March for an eight-week sea voyage to France.
Celebrating a major technical and human achievement in Japan on 30 January. During his congratulatory speech, ITER Director-General Bernard Bigot described the industrial component as one of the most complex first-of-a-kind components of the ITER machine.
"I am deeply honoured to be here with you to celebrate the completion of this first-of-a-kind component," said ITER Director-General Bernard Bigot during the event held at Mitsubishi Heavy Industries' Futami plant in Hyogo Prefecture, Japan. "As you know [this coil has been] years in design, procurement, production and testing. Congratulations to all who contributed to this major technical and human achievement!"
Eighteen "D"-shaped toroidal field magnets placed around the ITER vacuum vessel will produce a magnetic field whose primary function is to confine the plasma particles. The toroidal field coils are designed to produce a maximum magnetic field of 11.8 tesla and store 41 gigajoules of energy. Weighing 360 tonnes each, and measuring 9 x 17 m, they are among the largest components of the ITER machine.
The technical specifications of the coils were transferred by the ITER Organization to the procuring Domestic Agencies through Procurement Arrangements in 2008. Since then, ITER Japan (nine toroidal field coils plus all coil cases) and Europe's Fusion for Energy (ten toroidal field coils) have selected industrial suppliers, completed design and manufacturing qualification activities for each fabrication step, and launched series production. What begins at the factories will be continued at ITER as—by pair—the toroidal field coils are interlinked with one vacuum vessel sector and vacuum vessel thermal shielding before taking their place in the Tokamak assembly pit. All toroidal field coils are expected at ITER by 2022.
Because the precision of coil geometry is critical to creating the magnetic field required for plasma confinement, any non-conformity of fabrication tolerances or assembly misalignments can result in errors in magnetic configuration. As a result, particular attention has been paid to dimensional control throughout the fabrication process—from the manufacturing of the core winding pack and case structures, to the insertion of the winding pack inside of the case, and finally closure welding and final machining.
Factory acceptance tests were completed on the magnet on 19 January 2020 with the participation of ITER Organization observers. Electrical tests, dimensional inspection, visual inspection and pressure drop measurements confirmed that the coil meets all technical specifications. The component will now be packed for international shipment.
Le consortium choisi en décembre pour la construction du Complexe tokamak planche déjà sur les plans détaillés. Dans les prochains mois, l'équipe chargé de suivre le déroulement des travaux sur place s'installera dans des bureaux. Les travaux de génie civile doivent débuter à la fin de l'année. Photo : F4E
Entre le radier du bas (qui soutient les piliers) et le radier du haut, il y aura un espacement de deux mètres. Le coffrage qui sera mis en place pour former le deuxième radier devra être évacue à la fin des travaux par cette espace. Photo : F4E
Avant la fin d'année, le radier B2 (le plancher du Complexe tokamak) sera terminé. Photo : F4E
Case closure welding
To prevent welding deformation during coil case closure from disturbing the position of the winding pack and its current centre line—especially over the 70 metres of weld length required to seal the case shut—contractors supported the winding pack inside of the case with custom shims and monitored out-of-plane welding deformation by precision laser tracker in real time, allowing the welding sequences to be adjusted as the work progressed. The required tolerances of bevels at the welding grooves were respected across the board at less than 1 mm.
Nous n'aurons plus de photos comme celle-ci dans un proche avenir : le coffrage et l'étayage pour le radier du Complexe tokamak doivent commencer à la fin du mois de février. Photo : F4E
L'École internationale de Provence-Alpes-Côte d'Azur a eu lieu le 24 janvier 2011, en présence de Michel Vauzelle, président de la région PACA. L'école est ouverte aux familles ITER, mais également aux enfants de la région qui souhaitent bénéficier d'un enseignement international.
Acceptance tests
Factory acceptance tests on the first toroidal field coil produced in Japan were carried out at Mitsubishi Heavy Industry's Futami plant on 19 January 2020. Electrical tests, dimensional inspection, visual inspection and pressure drop measurements confirmed that the coil meets all technical specifications.